View Single Post
  #1  
Old 12-03-2010, 12:34 AM
Milad's Avatar
Milad Milad is offline
Member
 
Join Date: Apr 2010
Location: North Vancouver
Posts: 901
Milad is on a distinguished road
Send a message via MSN to Milad
Default Milad's 72in LED build

Lets get this party started! ---- WARNING THIS IS MY FIRST LED BUILD ----
I knew as much as you did before i started this build, but its actually quick pickup after knowing nothing about aquariums and building a 180g i think LED is easier.


So i needed something to do during the Christmas break so what better way to spend my time than building a nice 72in LED for my 180G tank.

Link to my tank build is in my signature but there are a few things to know about the tank.
No canopy
2 dividers every 24in
peninsula!


So basically I have to work with the parameters above. Having no canopy is good and bad, I probably wont need fans if I have good heatsinks because its open air above it but I have to make it look clean since everyone can see it! gota hide those wires.

Dividers suck because I have to pick the correct optics so shine the light and the correct size of the modules.

What I will be building is 3 module system. Each module will be plug in play. Currently im going with only 2 drivers for all the modules. This could change. The drivers will be dimmable and attach directly into my apex controller.

I will be buying LEDs from the group buy I started which is located:
http://www.LEDGroupBuy.com

sick deal hey?!

im going with
XP-G CW 60
XP-E RB 84

+ 144 40degree optics

Total of 144 emitters

To run the whites I will be going with:
Mean Well HLG-240H-42B

To run the royal blues I will be going with:
Mean Well HLG 240H-54B


That will give me a 42% cool white 58% royal blue to achieve something in the 14-15k color range, equivalent to 250-400w MH.


Here is a preliminary idea of what the fixture will look like (will probably incase everything in black plexi):



more to come soon

Quick Links:
Initial wiring diagram with parts list

Last edited by Milad; 01-18-2011 at 10:09 PM.
Reply With Quote