so RO DI went into my kitchen sink and live rock is in
I got bunch new equipment thats not been installed including
H & S skimmer, 1/4hp chiller, new sump, and marine tech calcium reactor
The tank is going to finish cycling before i start putting in the above equipment.
Here are some pictures of the RO DI
It was funny though, I had the waste and clean water hooked up backwards and spent 4 days putting in 4 inches of water in the tank!! lol
Before shots of my sink
I went to clamp on the drain for the RO DI AND IT WOULDNT FIT!! the pipe was too big
So after 5min of creative thinking, I came up with this:
Hot knife through butter
Perfect fit
i went to drill a hole for the top faucet and turns out i didnt have any metal drill bits.... so i started with a very tiny wood drill bit for about 15min, then to a 1/4 wood drill bit, then some needle nose pliers to widen it a bit. This wasnt the first time a hole was too small for me. anyways after a half hour it went in nicely
I do have to say, this stage of the project was all about being creative since i didnt have the tools.
And now for the live rock
I think there is close to 250lbs of this stuff. (this was my first aquascape so dont be mean!!)
feedback on aquascaping?