Quote:
Originally Posted by Llorgon
Aww man. I was definitely hoping to get a LED light. That may have to be a future purchase I guess. For the ATI lights, how many bulbs should I be looking at? I see they have 4,6 and 8 bulb versions. I am kinda realizing that the cube tank will just be too expensive. The wife will be so sad!
|
If you're really wanting a cube tank, you may be able to get something smaller like 24 x 24 x 20" tall or something (this is 50 gallons), and use an AI Prime HD to light it (that's a good-quality LED fixture) which are only $249.99. Honestly though, 24" for the Prime is really stretching it. I'd be more inclined to put it over 18 x 18". Even on 18 x 18" you'll get a spotlight look to the tank where the middle has a lot more light than the edges. I actually kinda dig that look, and you can get really creative with using that spotlight to great effect.
If you want to stick with the 75-gallon then you'd want to use (3) AI Prime HD (or a different fixture altogether). There just isn't a way to light a 75-gallon tank with good quality LED for less than about $800. That's a big chunk out of your budget.
For the ATI, for a 75-gallon tank you would probably not need more than 4 bulbs. 6 bulbs would end up being more light than you need for LPS corals. If you were doing an SPS tank I'd suggest 6 bulbs. The ATI fixtures are high-end and provide the corals with more usable light than other fixtures (especially when combined with ATI bulbs), so you can use less bulbs than a cheap fixture.
Quote:
Originally Posted by Llorgon
I do like the look of those ghost overflows. They take up much less room. Are they easy to install? Keeping in mind I have never drilled a tank before.
I'm going to look into these ghost overflows more. Seems like it would be a good space saver inside the tank.
Is there a reason for not liking the piping going down the back of the tank or is it just how it looks?
|
If I were you I would buy a cheap 5-gallon tank from PetSmart or something and practice drilling it - one hole in each pane. A 5-gallon tank is tough to drill because the glass is very thin and it breaks easily. For this reason, it is great to practice on. I think they are $20 to buy or so. If you can drill a 5-gallon you can EASILY drill a 75-gallon.
I don't like to see the piping which is why I don't like the piping running down the back. I don't care what color the piping is, I just don't want to see it.