Small Update:
The sump was next on my list. It’s a standard 15 gallon tank with baffles siliconed in. I took out the old baffles and adjusted the chamber size a bit. My baffles are currently perfectly sized to keep an optimal height for my skimmer. I’ve also sealed the central chamber in the event I wish to add a fuge at a later date. While I do not doubt there are benefits to a fuge, I can’t be certain I’ve seen any evidence that the benefits outweigh not having one. I might toss some Chaeto in one of the chambers eventually, but currently there are no plans for a dedicated fuge.
Very simple setup:
The tank will drain with a couple 1" PVC drains into the first chamber which will be filled with live rock rubble. It will then enter the second chamber which will house the skimmer before entering the 3rd chamber for my Eheim return. It's going to be plumbed back on a 3/4" return. As I'll be using a Vortech MP10 for flow, the Eheim will just be for water turnover or aimed in a spot for water circulation if necessary.
Next update will document the construction of of my DIY full spectrum LED Fixture. I've got one last order of materials incoming; after that I should have some time to share some equipment porn of all my goodies.