Quote:
Originally Posted by gregzz4
No big deal on the out-of-level issue
I used composite shims that don't compress over time or have problems with moisture
I bought mine at Home Depot. And 'cause they're brown you may not see them with your floors 
I can't find a Canadian link for you, but these are what I bought in the door department in Burnaby
They're just as easy to score and snap as the cedar ones too
Just to touch on your electrical ...
If you run BX, are you planning on it being in-wall just to the receptacle ?
If not, I'd suggest you go with something more water-compatible rather than a metal jacket that can corrode around your tank |
Thanks for the input Greg. I just can't sleep knowing the top of the tank is standing around 5' high with it's centre of gravity about 4 feet.
God I hope we never get that big earthquake here in the GVRD. I think in the future I will avoid the hassle of the levelling mounts (extra welding, ordering, drill and tapping) and just use the shims as you suggested. Thanks for the link.
In the meantime this pic will help me sleep at night.
As for the BX idea, I have decided against it. I will replace the receptacle behind the tank with a GFI one. If it pops the breaker I will just have to add an extension from the nook plug.
Did a leak test on the baffle I siliconed in place last weekend...
...and proceeded to a maximum pressure test on the sump.
The left chamber will be for drain/filter sock, skimmer, zeo reactor and pod love nest.
The middle chamber will be for mechanical and chemical filtration and the return is on the right.
As you can see I removed the return bulkhead and put in 2 panes of 6mm float. If ever you need to replace the bulkhead you can just use an old high E guitar string to garrote the silicone.
Here is a straight up view from inside the stand taken just for Laurie (The Guy). As you can see Laurie, there is plenty of room for the bulkheads and I was worrying about nothing, Lol.
Thanks for looking.