View Single Post
  #2  
Old 07-31-2016, 03:09 AM
gregzz4's Avatar
gregzz4 gregzz4 is offline
On Hiatus
 
Join Date: Oct 2011
Location: Burnaby, B.C.
Posts: 4,890
gregzz4 will become famous soon enough
Default

Reactors were re-positioned. They still hang over the sump enough to leak into it, although the pic doesn't give the perspective.



Sump cooling fans got an upgrade; When I run out of 80mm fans in my pile, I will build a new bracket for whatever cheapest/most popular ones are on the market - 120mm, 140mm, whatever



Siliconed the contacts this time as the last set corroded





New mounting bracket



New location, and besides removable, it's also able to slide out of the way



Dosers got a partial upgraded location





As mentioned, this is where the tubes will drip into the sump, just before the last baffle to the return section. They may be hard to make out on smaller screens, but there are 3 holes for 1/4" airline tubing. Squint !!



The electrical panel received a total makeover;
I moved it to the other wall, giving the plumbing some more space through the wall.
I built a complete new panel, with all the duplex outlets now flush, and used nearly 20' of panduit.
Now all my Reefkeeper Bus cables are completely isolated from any 12v/120v lines.
After 4 weeks of running ... no bus errors





And a cover


Last edited by WarDog; 07-31-2016 at 06:05 PM.
Reply With Quote