View Single Post
  #1  
Old 01-25-2016, 04:09 AM
Beanz's Avatar
Beanz Beanz is offline
Member
 
Join Date: Aug 2010
Location: Calgary, Paliser
Posts: 168
Beanz is on a distinguished road
Default Beanz's 25 Gallon Nano Adventure

Hello everyone, I've recently decided to set up another salt water aquarium after some time of being out of the game (2013). Anywho here's some background info on me. I started dabbling in SW aquariums when I was around 16 year old. Being that young I rushed things and had to try and correct errors because of that in my tanks back then which ended in frustration and tank shut downs. Now since I've grown older I realize that good things take time and I'm hoping that this tank will be much better because of that. I'm a welder by trade so naturally I built a wooden stand for the lovely 25 gallon tank I bought if a canreef member so long ago . Then I realized, hey I'm a welder, why not utilize that skill and build something wonderful. Any ways lets cut to the exciting stuff.

Equipment:
Overflow: Glass holes 700 in-and-out overflow/return
Power Head: Vortech MP10W
Filter Sock: Eshopps filter sock holder
Skimmer: Bubble magus qq1 (will hopefully return and get a Tunze 9004 because my sump water level is too low for this skimmer even though the water level is above the min line )
Heater: Fluval E100 (may also try and return to get a larger one as this won't keep up with the volume)
Lighting: Kessil A160WE Tuna Blue
Sump Lighting: DIY LED (came with tank)
ATO: Tunze Omsolator Nano
Return Pump: Aqua Euro AE-370
RODI: Vertex Puratek RODI set up

Enough with the words, here's pictures!!!

What it all began with, 24"x17"x14"



The beginnings of the stand. 2"x2"x0.125 wall HSS capped off for the uprights.



C Channel fit up to the uprights.



Frame all fit, ready for welding.



Cross members tacked up for support for the sump and tank.



The girlfriend, just givin' er laying down more serious welds than me



Now on to the wood work. I found an awesome look when I was browsing Instagram furniture and that's what inspired me to build my stand the way I did. Really loved the look of burned wood so I did what anyone would do and gave er a go.

Before:



After, it was mind blowing to see the grain just come alive before my eyes!



The side panels are made of angle iron with wooden inserts, they've got a gusset welded in each corner where a magnet sits which corresponds with a gusset on the stand. This feature is so simple, having the full panel remove, but is such an improvement over hinged doors in my opinion.





Top fitted to the frame.



Drilled the tank for overflow and return.



20 gallon sump with all baffles in place. Skimmer section on the right, middle is the refugium and return on the left. Refugium light is in there too with the bolt in angle iron light holder.







Finally got the system wet a week ago! Such an exciting moment.







Front off picture.



Sump in action.



When I designed the sump I wanted the electronics to be very hidden and out if harms way. So I built the light mount for the Kessil to house the cord leavings clean look then thought why stop there. Being a welder means I'm quite fussy almost OCD at times lol. I wanted a clean and simple way to have all my gear out of the moisture present in the sump area so I make a compartment for all of it. Open at the back side of the stand to vent heat and such it worked well to eliminate the mangled rats nest of wires I had going on in my previous tanks. Zip ties and screws was all she took to make me happy.



Anyways that my lil nano as she sits and that's all I can muster to post for now. I do have a few questions that would be awesome for someone to answer at some other time.

Cheers
Reply With Quote