View Single Post
  #1  
Old 12-04-2020, 03:53 AM
gregzz4's Avatar
gregzz4 gregzz4 is offline
On Hiatus
 
Join Date: Oct 2011
Location: Burnaby, B.C.
Posts: 4,890
gregzz4 will become famous soon enough
Default FS: ATI Powermodule 8x54watt Burnaby

PM your # for fastest response

Hanging kit and will include flatbar to screw to ceiling joists, and power supply for cooling fans. Acrylic splash guard.
Also comes with 4 spare BNIB fans and 1 spare BNIB ballast. I like to have spare parts on hand, but never needed them.
8 bulbs installed some used some new, and 10 more 1/2 life used bulbs good for another year of use each.
Enough bulbs for a couple years to start you off.
Grows any SPS you want

Will include a canopy for another $50.00 (specs below)

$500.00 firm





Canopy for above style light; home-made. Fits standard 75g 4’ tank with trim or eurobraced. Approx. 48-5/8” x 18-7/8”.
Open top; lights sits on 1/2” black weather-strip closed cell foam (upper, and lower to sit on tank).
Black glossy pine; bright white inside. 2 x 120mm inlet grills (left side back) and 1 x 120mm exhaust fan (right side back) w/power supply. Doors on each end and twin center doors with no center brace in the way. Mount for eheim autofeeder w/air hole for feeder fan. Cut-outs for over-the-back returns.
Fits lights 16-1/2” to 18-1/4” x 45-1/2” to 48-3/4”. 9-1/2” tall without black foam, with 6-1/2” tall door openings. End door openings 11” wide; front opening 36-1/4” wide.
$100.00

Last edited by gregzz4; 12-04-2020 at 04:05 AM.
Reply With Quote