View Single Post
  #3  
Old 03-31-2013, 05:06 PM
Scythanith's Avatar
Scythanith Scythanith is offline
Member
 
Join Date: May 2008
Location: Saskatchewan
Posts: 1,088
Scythanith is on a distinguished road
Default

The fishroom is wired with 2 20 amp breakers. The first powers the 4 receptacle on the left hand side of the room. The second runs 6 receptacles along the back wall, with the final two on GFCI. I know it's overkill, but I'd rather that than kick a breaker after a power outage. I know the LED's and DC pumps should really soften startup but a little overkill isn't a bad thing. The sink will be a stainless scullery sink that can easily fit 5 gal pails. There is some cabinet and cupboard space, as well as wall space for the RO/DI. The salt and fresh reservoirs will be set in another room most likely, but I will fit them by the sumps if possible.

I plan on using either a profilux or a neptune controller. I haven't really decided either way yet.
Reply With Quote