Quote:
Originally Posted by Myka
Twist the black loc-line pipe so the output is closer to the surface and/or drill a 1/8" hole in the plumbing somewhere to cause a siphon break (though I don't really see a spot that would help you out). If the black pipe is too short, add more to it. The output should be as close to the surface as possible without causing splashes or a vortex. This will minimize the back siphoning.
|
Thanks for the response, Since the white PVC has to be twisted so it's facing right due to leaking if it is not tight enough, I cannot angle the black loc-line pipe into a position where it is not splashing water onto my light and also does not create a siphon. About the drilling of a hole to stop the siphon where would I drill on about? Also where could I purchase more of the black pipe, or a split system that I have seen people use to disperse the flow of the return pump
Thanks