Quote:
Originally Posted by rishu_pepper
|
That'll do it. I have one of them as well, but don't use it for my fish tank since I installed a couple of in wall GFI outlets. I haven't read the specs for this power bar lately, but one thing to be aware of, especially for workshop type ones, is that many of them will not automatically reset after a power outage. The reason for this is that if you're running a portable power tool that trips the device, you may not want it to start up again unattended while you go reset the circuit breaker. Most of the built in/replacement wall outlet GFI devices will generally not trip when there's an outage & when power is restored by the hydro company, they will be on & continue to run whatever is plugged in to them. This is probably a good thing if there's an extended power outage & the power comes back on while you're away.
Quick way to confirm is to plug the GFI power bar in, go trip & reset the circuit breaker & see if it's still live after cycling.
For those folks who think they are safe using a grounding probe without a GFI device at the same time, do a little research. In the end, it's your choice & risk, but you could be liable if a friend, visitor, child gets injured when they stick a hand or arm into a tank with unsafe electrical components.