So here we go, stand is build and leveled. Fiberglass has been poured over matting to about 5mm thickness. I glued/screwed a 1" x 2" plywood frame, with the tank's inside dimensions, on top of the plywood bottom to provide me with a surface to silicone the glass to.
After I had finished assembling the tank I chickened out and glued pond liner to the fiberglass just in case it may develop a crack. I used polyurethane to glue the liner. As you can see, I also started on the plumbing for the CL
Time to hang the external overflow box for the coast-to-coast and get going on the BeanAnimal style plumbing
Overflow and closed loop plumbing is done
For my back wall I wanted a solid live rock structure, diy for sure. Starting out with 2 sheets of the reefers secret weapon, I ended up with this.
