Little bit more accomplished over the last week or so. Today we got rained out at work so I spent a bit of time sanding my face frame's for the cabinetry. So here's a couple pics of the frames dry-fit on. Everything is getting a coat of Claw Lock sealer, then 3 coats of white, then another couple coats of clear to help give it that nice polished look. Doors are going to be shaker style. I will also have a window sill trim (that matches all my window sills) to cap the top edge at the lower part of the tank and a crown moulding on the top to match my existing crown moulding that goes all around my house.
Starting to look like something! Next.... plumbing
And here is the left cabinet space. There's a cavity between the top cabinet and the bottom cabinet where all the plumbing will be run through. I cut the side of this gable out to allow me to fish all my wiring up inside the wall for my Apex and for the ducting I have that will run into the canopy that will be hooked up to a HRV in the fish room downstairs.
