View Single Post
  #28  
Old 03-23-2014, 11:42 PM
mike31154's Avatar
mike31154 mike31154 is offline
Member
 
Join Date: Jul 2008
Location: Vernon
Posts: 2,073
mike31154 will become famous soon enough
Default

Before the 'electrical' part of this thread gets buried any further, I'll weigh in with a couple of things if I may! A dedicated outlet for the tank is never a bad idea, actually two would be better and most importantly, GFI protected as you're dealing with H2O. That nice titanium grounding probe you picked up at J&L is no substitute for the safety of GFI protection. Open a wall if that's what you need to do, or have the tank closer to the 'nook' location if that's feasible. I'd advise against running an extension cord if at all possible. Chances are you'll be using a power bar or two in order to have enough outlets for all the stuff typically required to keep the tank going. Power bars already have an extension on them & daisy chaining that with another extension cord is against code I believe. In any case, it's a potential hazard.

Fine looking build so far! Now's the time to get the electrical right, not after it's full of water & livestock.
__________________
Mike
77g sumpless SW
DIY 10 watt multi-chip LED build http://www.canreef.com/vbulletin/showthread.php?t=82206
Reply With Quote