I am going to grab another mp40 and have two on the left side creating flow across the bottom of the tank from left to right. Then I am hoping by having the three returns on that side all aimed high they will continue moving the flow to the overflow weir. That should get as much of the surface skim as possible to the sump. The other three mp40's will be along the back of the tank pushing to the front.
I am hoping to take some of my corals from the 40g and transfer them to the 270g. I will have to wait and see if the peppermint shrimp have cleaned up my aptasia problem or not. I don't want to willingly add aptasia to my new tank if I can avoid it.
My nitrates are at ~10 and the phosphates are at 0.1. I have GFO in place for the phosphates, but decided not to run my biopellet reactor until my A200 for the bottom sump is installed. The Quietones 6000 didn't have the juice to run the reactors and the return tot he top sump. I bet if I had a ball valve on the return to the top sump I could have got the bio pellets churning a little better but that defeats the purpose. The cleaned water needs to get back into the top sump.
Also, I am going to pick up some tumbled marble tiles for frags. I am going to use them in the frag section of my top sump after soaking them to leach out any bad stuff.
I should be home in 10 days and get back to work on the tank when I can around the holidays. Right now my three fish from the 40g are transferred. A yellow tang, royal gramma and long nosed hawkfish. I also added a small clean up crew to start dealing with the small amount of algae that's starting. There are 4 conches, some cowries and some turbo snails. Oh, I also moved my long spine urchin into the 270g as well. Really all there is left to do is move the corals
Cheers,
Scott
|