Ya, I had an SRO int2000 as well and it didn't work well at the depth they said either. Mine seemed to work the best right around 6" if I remember correctly. One thing I found though is that it raised the effluent discharge a fair bit and the water exiting the skimmer got noisy. I put an elbow on it which did quieten it down but I found out that if you turn that elbow down all the way so that it's totally submerged, it air locked. SO I had to turn it a bit so at least a bit of the elbow was out of the water so that air could escape.
The other problem I had was that piping isn't standard size and I had to use a bit of spa flex filed down on one end to connect the elbow to the discharge of the skimmer.
|