The fishroom is wired with 2 20 amp breakers. The first powers the 4 receptacle on the left hand side of the room. The second runs 6 receptacles along the back wall, with the final two on GFCI. I know it's overkill, but I'd rather that than kick a breaker after a power outage. I know the LED's and DC pumps should really soften startup but a little overkill isn't a bad thing. The sink will be a stainless scullery sink that can easily fit 5 gal pails. There is some cabinet and cupboard space, as well as wall space for the RO/DI. The salt and fresh reservoirs will be set in another room most likely, but I will fit them by the sumps if possible.
I plan on using either a profilux or a neptune controller. I haven't really decided either way yet.
|