Quote:
Originally Posted by ReefOcean
I tried dismantling a 10 gallon before and I couldnt get the silicone between the glass withough cracking it. Is there a special way of doing it? Is my initial idea viable?
|
Get a thin guitar string (high E) and run it between the glass. It'll cut the silicone like butter.
When re-doing the tank, run tape about 1/8" from the seam. After you stick the panels together, run a nice bead on the inside of the seams, wet your figure with a bit of soapy water and run it along the seam. This will give you a very clean looking seam and prevent any screw-ups due to the silicone setting. Peel the tape off after it has set a little bit. Now you have pro seams and super clean and straight edges to the silicone.