Quote:
Originally Posted by kien
No, the float value will not shut off the supply/source line to the RO/DI, just the output. This just blocks the RODI water (after filtration) into the brute can. This is enough to prevent the reservoir from overflowing. However, as i said earlier, if you still leave your source water on, evap in the brute can will cause the float valve to drop just enough to cause the RO/DI to kick in again for a very short period of time and this will happen continuously throughout the day which will wreck your membrane. You still should shut off the source water into the RO/DI when you're done making up water.
|
unless Kien you have a Solenoid for the input of the water coming in.
__________________
180 starfire front, LPS, millipora
Doesn't matter how much you have been reading until you take the plunge.
You don't know as much as you think.
|