Quote:
Originally Posted by kole
I'm just getting to set mine up on my new tank. The instructions are not the greatest. How is everyone else setting their doser. Are you using manual mode or timer mode with programmed times to dose. The doser pumps on my other tank are quite easy to set. Just set the mls per hour and your done. This one not so easy or am I missing something.
|
I will walk you though it.
1st set the actual time then
set the
Timer lock(acts as a protection from a failure and having any pump to overrun)to the max of any of the pumps setting timer.(Example the maximum any of my pumps runs is 55 seconds so I set the
Timer lock at 58 seconds)
Each pump could be set
16 different times for running
ON and
OFF.
You simply set the time the pump to start then the amount of time to keep pump running.
For each setting of the pump you get the choice of pump speed info below.
S-1 0.05 to 0.075ml/sec
S-2 0.1 to 0.2ml/sec
S-3 0.25 to 0.35ml/sec
S-4 0.5 to 0.6ml/sec
Hope that helps and if I missed something I am sure others will point it out
.