So I tried the wrench NO GOOD... wife chopped my head off not for having a leaking tank but for buy a tool for 10.00 that didnt solve the problem.... So I cut into the bulkhead, first I cut into the top of the bulkhead (on the bottom) and chipped a piece out with a flat screwdriver to reveal glue... so I cut at the top inside the bulkhead towards the nut and found glue holding the nut on and glue holding the top (bottom) to the screw in piece... If I continue to cut the bulkhead in slits on the inside will i be able to get this to come out? I want to know if anyone has had this happen with a solution. Thanks for the ideas so far keep them coming I'll try anything to get this out!
|