Ok, I have about 90 gallons of water including sump and rock displacement so I have 180 grams of zeolite media in the TLF PhosBan reactor running first inline with GFO running second inline in a second reactor. I measured and adjusted the output to be darn close to 25 gph. I measured approximately 1.5 liters per minute, so that's about 23.5 gph.
When I have to turn the zeolite media up to 100 gph I won't be able to run the GFO that fast or it will blow away, so I will have to figure something out. Maybe if I put a foam pad on top of the GFO and add carbon to the top of the reactor I could run it 100 gph. Time will tell.
Here we go... *holding breath*
