What firmware are you running you light with do you have the latest? I was having an issue after a failed attempt at me upgrading the light but it was totally my fault
If the software is not updating to a specific pad, the best results can come from resetting the pad in question. To do this:
1. Carefully remove the fixture endplate on the power cord side
2. Slide out the acrylic glas shield carefully and place it in a safe location
3. Press the small button next to the white auxiliary expansion plug on the module
4. Power on the fixture and retry the firmware update process
Once the pad is reset, go to summary—update firmware, and select “complete update.” Then select the pad range specific to the
reset pad (please note that the first pad is module 0, so if the 3rd pad is giving problems, it would be module/pad 2).
__________________
360 gallon sps reef, 180 gal sump, bubble king supermarine 300, 4xmp40Wes, 2 x 6215 tunze waveboxes, 4 ghl mitras
360 Reef Tank