Quote:
Originally Posted by sphelps
Heat it up. Same thing happens with rotors all the time, WD40 probably won't do anything. Use a propane torch and heat the ring up, careful not to burn any hoses or heat up any other parts. If it's aluminum it won't take much and it melts at 500 so be careful.
When you get it off remember to use anti seize (silver paste) next time you install them.
|
sphelps is right, only use a propane torch and use with caution. This is one way
another way is with a pick. all thats holding it on is build up and if you buy a set of picks you can get it off in a few min. If you lived closer I would come over and help you out.