View Single Post
  #2  
Old 12-08-2010, 10:10 AM
MitchM's Avatar
MitchM MitchM is offline
Member
 
Join Date: Mar 2002
Location: Water Valley, AB
Posts: 1,280
MitchM is on a distinguished road
Default

Quote:
Originally Posted by steve fedyk View Post
...

How much flow should there be from side to side 5x , 10x ,or more. you don't wont to much flow or too little. ...
It depends on what environment you are trying to recreate.

Ocean current speeds can range from 2 centimetres/second up to 2.5 meters/second, so it's totally up to you.
I want to keep SPS type corals up near the top of my aquarium, with LPS down on the bottom, so I want a much lower flow in the lower areas with minimum dead spots and much higher 'flow up top with the use of seaswirls that will accommodate the SPS' environment.

I don't know how you can avoid complications from debris and small animals if you use the same pipes for both suction and discharge, so I think I will go with a clockwise flow for 5 hours , followed by a 1 hour period of rest then 5 hours counterclockwise flow.
On the intake screens I'll have much smaller screens than on the discharge screens, unless I run the cycle through the sump return pump where there will be no intake screen.

Mitch

Last edited by MitchM; 12-08-2010 at 10:13 AM.