Quote:
Originally Posted by Tyler Werbowski
What can you do about the pellets rising to the top of the reactor. Currently have about 1/5 of my pellets clumped together at the top. Rest are on the bottom tumbling.
MJ 1200
TLF reactor
250ml pellets
no foam
michaels plastic mesh (stuff mentioned earlier in thread)
Thanks,
TW
|
Tyler
use the flow reducer that comes with the tlf reactor (green on black ball valve) on the pipe between reactor and pump. shake all the pellets down to the bottom, close valve complete, then turn on pump. SLOWLY turn the valve on while shaking the reactor to get the clumps to break apart and not flow to the top. open the valve until you get them tumbling but not floating to the top.