Quote:
Originally Posted by Coleus
well i totally fail on this. I was away for couple days and the mulm build up that clog up the reactor. I think i am done with TLF, going to look for a big reactor that can do the job
|
I personally use a Deltec Fluidizer, without using any sponges/foam inside. I have 1.5L of Pellets running with a MJ1200. They tumble quite nicely and there is about 1.5-2 inches of space from top of output and top of tumbling pellets.
Things work well and no pellets are expelled from the reactor. I personally would recommend that everyone not use the foam inside and try to get tumbling without forcing the pellets to the top.
These pellets once soaked for a bit do sink, and therefore if flow is correct won't end up in aquarium.