Quote:
Originally Posted by asmodeus
that is very easy to do , the bulkheads are easy to do unscrew them and taks a hammer to the bottom of them to loosen the bulkhead.
|
It was pretty easy. I didn't need the hammer though, just wrestled it around until it loosened.
Quote:
Originally Posted by Dez
I used razor blads and guitar string to remove my overflow.... a lot of work.
|
Understatement of the year... I found using razor blades and then using a pvc pipe as leverage was easiest. Used the pvc to widen the gap, all while sticking pencils as "shimmies" and constantly used a razor blade (from hobby knife set) to free it.
Thanks!