that is very easy to do , the bulkheads are easy to do unscrew them and taks a hammer to the bottom of them to loosen the bulkhead. and why not keep the over flow there to put your heaters in and have3 a powerhead with some fittings on there use some 1/2' pvc and when you getto the top of the over flow use a 90 and a 90 glue them and put another 90 on there and you have a instant circulation flow going and the water in the over flow is getting heated.
and u hide your heaters in there and put stuff like carbon in a bag there too.....
__________________
180 starfire front, LPS, millipora
Doesn't matter how much you have been reading until you take the plunge.
You don't know as much as you think.
|