Quote:
Originally Posted by Bloodasp
As far as I know if you have a refugium in your sump you need to slow down the waterflow into it so that the stuff you have in there could do their job efficiently. The rest to me is just trial and error up to this point. Just as long as the water is quite clean, there is minimal noise, and the water does not end up on my floor.
|
OK, thanks. Yeah well the return pump rate won't effect the refug flow b/c I'm going to T my input line from my DT with a smaller diameter pipe running to the refug on the right of the return line, and the larger pipe with the fast flow going to the skimmer on the left side of the return pump