[hillegom]

Originally Posted by mike31154

Yeah, the stove fuses not burning out and the main breaker (whole house) tripping is cause for further investigation. Have you checked the receptacle/plug for the stove itself? Could be a loose connection there causing excess current to be seen by the breaker, but not the stove. How old is your home and/or the wiring? The BC electrical code calls for the stove to be on its own circuit with no other loads, which is probably the case with your set up since it should be on at least a 40 amp breaker with two phases (3 wire cable plus ground of size 8 wire) to provide 220 VAC to the oven & probably the burners as well. A book called "Electrical Code Simplified Residential" (B.C. Book 1) published by PS Knight should be available at any home improvement center for around $12. Not a troubleshooting book per se, but plenty of good info in there on your home's electrical system. Great bang for the buck.

I'd check for loose connections before going out to buy new breakers.

Keith, I would try that.