Quote:
Originally Posted by mark
Below the fitting for your dishwasher drill a hole, put the clamp over an tighten, insert the waste line from you ro unit, done. Would route the waste water line similiar to your dishwasher (a upward loop).
|
Ok....I will take a picture then because I don't know exactly how that will work. I understand drilling the hole (I guess the diameter of the tubing?) and then using the clamp but the tubing doesn't go all the way through the clamp, so would not reach the drilled hole. Obviously thats not a good thing
There is a little tiny white piece that came with that clamp but I don't see how that would help. Must be needed though. As well it has a little piece of foam I think...