Quote:
Originally Posted by AndyL
JDigital - brought this out of pm's so it's out there and transparent to everyone. Then there's no questions later on.
If it's a matter of colby doing the work - I'm more than happy to build the tank myself...
So, If I'm to tear down the 5.5g, remove and replace the sides n bottom (adding 3", in 1/4" of course), Laminate the ends together to create an adequate back, install a new front... Laminate the sides & cut to length to create the 3 baffles, Use the old bottom to create a eurobrace... Then we wouldn't be having this conversation right?
Rebuilt / built - take your pick, I can't go out and buy a AGA built out of 1/4" glass; and the factory 2mm will not last (Blew a seam on my AGA 2.5g last night test running a 1g surge; same construction same glass thickness); thus it doesn't meet my needs thus as the rules say, modding to meet my needs. Which is allowed, I have a picture of a 5.5g stock tank - My modding is going to start with replacing all the glass; not asking to have this for free - I'm happy to account for the costs... Name the terms; I don't see why I can't replace all the glass, but If I have to go with the previous paragraph, I can do that too...
|
I don't care if Colby does it, you do it, or anyone else... replacing the glass with thicker glass is out of the question. You are making this more difficult that it should be.... If you can't build the setup with a stock tank, then so be it.
I think your idea is great, and would love to see this tank, but your not allowed to replace the stock glass. I told sphelps that, I told michika that, and a couple others that only wanted to build a custom tank who decided to opt out of the contest. If you need to discuss this further, feel free to call me.