View Single Post
  #15  
Old 06-16-2008, 10:52 PM
Scythanith's Avatar
Scythanith Scythanith is offline
Member
 
Join Date: May 2008
Location: Saskatchewan
Posts: 1,088
Scythanith is on a distinguished road
Default

I think 22" will be water level height, 24" will be the glass top.... to be honest I haven't quite decided. I would like to be able to reach the bottom in most areas of the tank but the 4 foot front to back dimension makes that difficult.

The overflow will be two smaller overflows at either side of the back pane most likely to surface skim from either side of the tank. And yes, they will be small to promote water movement.

There will be two or three returns with most of the in-tank circulation being taken care of by vortechs.

Haven't figured it all out quite yet!

Quote:
Originally Posted by sphelps View Post
Hey Scott, glad to see you lowered your height from your original 30", I see you may have reduced it twice? picture shows 24" but you also stated 22".

For your overflow I have a suggestion. Don't go with an end to end design. Stick with something smaller like 12-18". You can notch the glass and go with an external overflow. From my experience the larger end to end overflows do not skim the surface as well. If you use a smaller one you'll be creating a higher velocity flow from the tank into the overflow which will increase surface tension and actually skim the surface water better. With the end to end you're not going to get a good velocity nor surface tension and as a result will not skim the surface as well. Think of it like a vacuum cleaner, with a huge nozzle it's difficult to suck stuff up, but with a small nozzle it's much more effective.
Reply With Quote