If ProfiLuxControl finds the card but isn't able to communicate with ProfiLux these are possible reasons:
- port 10001 is blocked (in windows or in the router) - for searching the card another port is used!
- an other port than 10001 is selected in WLAN card or ProfiLuxControl
- the baudrate in ProfiLux (only adjustable over the frontpanel of ProfiLux) is different to the baudrate in the WLAN card (only adjustable over the lantronix web configuration site) (recommendation: 9600 on both sides)
- the WLAN is not plugged in completely
- worst case: card and/or ProfiLux is defective - but this never happened until now
|