Quote:
|
Originally Posted by Mak
MB, you are overdriving both bulbs. Essentialy you should be running 4 55watters or 2 96watters. Either change the bulbs or add a couple more or get a WH5, cause as far as i've heard OD PC's is a no no. Yeah those bulbs must me smokin hot :shock: .
|
nope no overdriving at all there.. PC's run hot, hotter than VHO but not as hot as MH
.
to overdrive you have to increase the current.. two wires is the proper curent for PC's..
Just because the balast is rated for up to 220 watts dosen't mean that is what it puts out all the time.. a ballast only supplies curent to the bulbs, the type of bulb determans how much power is actualy used. I have been running my two 55watt PC's on a WH7 for 4 months now and they run at proper output and power consumption. All the 220 watt output means on the ballast is that it can supply the rated current to a MAXIMUM of 220 watt usage.
Quote:
|
Originally Posted by marine newbie
Hi all, just have a few questions regarding the wiring and heat issues. I looked at the diagram at fullham's website and wired up the wh7 to the endcaps for two 55w power compacts. I put two red wires into each endcap and it works, however i find that the lamps and endcaps get a bit hot to the touch . Anyone else have this happening? Anyone try using just one red wire?
.
|
this is normal, don't worry about it. I can only breefly touch my endcaps on my PC's also. if you run one wire there will not be enuf current to start the tubes..
Steve
__________________
*everything said above is just my opinion, and may or may not reflect the views of this BBS, its Operators, and its Members. If cornered on any “opinion” I post I will totally deny having ever said this in a Court of Law…Unless I am the right one*
Some strive to be perfect.... I just strive.