Question about Hannah checkers
 

About Hannah checkers are they good?
I ordered a phosphate calcium and alk from go reef

Should ask BEFORE ordering:) The PO4 is great, the others, not so much. Lots of complaints about them.

alk and phos are awesome calcium sucks, lr i like the ulr not so much:)

I use a Hanna kit for alk and I also read that Calcium wasn't as good as the elos kit. I should have listened to Dave/Denny at Concepts as the Elos kit for phosphate is fine but comparing colors at low levels is not as good as a digital reading.

yes the digital readout is what cought my eye ive read that the calcium reads a bit high at times but ive read reviews and i get mixed comments........ im just simply sick of guessing colors


what is soo bad about them they just not accurate??

well in order to get an accurate reading from the calcium you need to use di water, on top of that they have you adding different things at different times in very very small amounts so the margin for error is high.

i find its just as much work for the elos test for calcium as it is for the hanna calcium , but the elos doesnt add such small amounts of reagents.


the ultra low range test kits are good its just if your not ultra low then its not needed.

I find the Alk very straight forward and easy to use. Back to back repeat tests are consistent. Calcium you need to be very,very accurate. It seems to be even if you miss a few grains of powder results can vary wildly.

PO4 is good, Ca can be good but the syringe they give you to add 0.1ml of tank water is, IMO, not accurate enough. I carefully did several tests in a row on the same water and had readings fluctuating by 40-60ppm. I eventually got a very accurate glass pipette and am getting much more accurate readings. As already mentioned, you need to use very clean RODI water as part of the test, but you can verify it is Ca free by running a test without adding any tank water and dividing the test result by 100; ie if you do this and get a result of 200, your RODI water has 2ppm Ca in it. You should/will need to get a reading of 0, indicating a result of 0.00ppm, if it is flashing 600 then you have more than 6ppm Ca in your RODI water. If you don't have access to good RODI water, go get a 4l jug of distilled water from a pharmacy (~$3) and run a test on it to make sure it's ok.
Dan

hanna checkers
 

i have the phos,alk,cal,nit,and iodine and have never had any problems with them;and yes you really have to read the directions on the calcium

i just bought a good ro/di system from my LFS that has a tds meter built in it are those always accurate do you know?