Canreef Aquatics Bulletin Board

Canreef Aquatics Bulletin Board (http://www.canreef.com/vbulletin/index.php)
-   DIY (http://www.canreef.com/vbulletin/forumdisplay.php?f=13)
-   -   ATO pump with 10 foot head? (http://www.canreef.com/vbulletin/showthread.php?t=91950)

toolmanbmw 11-24-2012 11:59 PM

ATO pump with 10 foot head?
 
I would like to find a pump that can pump ro/di water from basement up to the first floor. Is there such a pump that can do that? I do have an Apex that can manage the pump.

Sent from my GT-I9300 using Tapatalk 2

Mike-fish 11-25-2012 12:15 AM

there's lots of pumps that will do it but it would be a larger high flow pump probably. are you looking for a submersible or external pump

Mike-fish 11-25-2012 12:22 AM

a mag drive 9.5 and up should work

toolmanbmw 11-25-2012 12:33 AM

Is there anything smaller? Like something almost the same size as the hose used in an ro unit?

Sent from my GT-I9300 using Tapatalk 2

Mike-fish 11-25-2012 01:06 AM

Fitting wise?

toolmanbmw 11-25-2012 01:11 AM

Actually does the mag 9.5 accept pvc fittings? Maybe I can keep down sizing it unit I get to a hose that will fit my need.

Sent from my GT-I9300 using Tapatalk 2

Mike-fish 11-25-2012 01:47 AM

It should with the appropriate thread adapter and reducers. I don't own a mag drive myself so I don't know for a fact

Mike-fish 11-25-2012 02:27 AM

might need a bigger pump than the 9.5 due to high head pressures of going to a smaller line

abcha0s 11-25-2012 04:19 AM

http://www.bulkreefsupply.com/spectr...o-top-off.html

It's rated for 50 fee of head pressure. I use one for a slightly different application and can attest to the quality.

- Brad


All times are GMT. The time now is 11:23 PM.

Powered by vBulletin® Version 3.7.3
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.