What Connects to What?
 

So, the brown and blue wires on the "AC IN" side of the driver connect to the white and black wires of the power cord. Got it. The green wire on the power cord is the ground, which connects to a wire that I don't have. No worries. Easy to resolve.

The black and red wires on the the "DC OUT" side of the driver connect to the black and red wires on the start wire? Or, do they connect to the red and black wires on the dimming cable?

The dimming cable also has green and yellow wires.

Help. :redface:

Red and Black DC out from the driver connects to the Start Connector (red and black) which goes to the LEDs:

http://www.modularled.ca/product_ima...94519_zoom.jpg

The following image shows the connections on the dimming cable which go to apex:

http://www.modularled.ca/product_ima...x-meanwell.jpg

What kind of driver do you have?

Thanks, Martin! I knew I has seen a wiring diagram for the apex cable, I just couldn't remember where.

I have the ELN-60-48D drivers.