Canreef Aquatics Bulletin Board

Canreef Aquatics Bulletin Board (http://www.canreef.com/vbulletin/index.php)
-   Bubble Magus Club (http://www.canreef.com/vbulletin/forumdisplay.php?f=166)
-   -   NAC-7 (http://www.canreef.com/vbulletin/showthread.php?t=83964)

parkinsn 03-08-2012 06:54 PM

NAC-7
 
I have a new NAC-7 in my set up. I can't get it set right, it just foams over. I cleaned it before use, have it sitting at 10", recommended is 9.5"-11". Its set on max but cant get it to stop foaming over.

Anyone have any thoughts? I talked to another member, same skimmer, same problem. A little further reasearch says 7" is the sweet spot. Or is just because this is a new set up with nothing to skim and it's just freaking out for the moment?

The instructions are in poor broken engrish. Is there something lost in translation that maybe the optimal hight is not 9.5"-11"?

Seriak 03-08-2012 07:15 PM

I read that you should be able to leave it at 9.5 to 11 but if you increase the air setting to 4 it will allow more air and less water into the cone. SHould stop overflowing then.

parkinsn 03-08-2012 07:20 PM

Quote:

Originally Posted by Seriak (Post 691470)
I read that you should be able to leave it at 9.5 to 11 but if you increase the air setting to 4 it will allow more air and less water into the cone. SHould stop overflowing then.

The air setting is at max. There is 1-4 then max, thats where its set now. If I put it at 1 the cup fills with water in seconds. at max it takes 30 sec.

Right now I have the skimmer running with the drain line open returning the water back to the sump. Its been running a week, should be broken in by now.

riceboy 03-08-2012 07:35 PM

i'll check mine when i get home to see what my level is on my 180 cs when i get home, i know mine is set to 3 and collects the right amount of crap for my system lol

parkinsn 03-08-2012 07:38 PM

Quote:

Originally Posted by riceboy (Post 691478)
i'll check mine when i get home to see what my level is on my 180 cs when i get home, i know mine is set to 3 and collects the right amount of crap for my system lol

Thanks man.

I'm going to try jacking it up a few more inchs and see what that does for me.

wmcinnes 03-08-2012 09:19 PM

tagging along.. my new NAC7 is in 9.5" and wont stop overflowing no matter which setting it is on. Think im gonna try jacking it up to around 7".

Proteus 03-08-2012 09:31 PM

I let mine sit in Pail water for two days running full open

Never had issue once broke in

fishoholic 03-09-2012 12:01 AM

Quote:

Originally Posted by riceboy (Post 691478)
i'll check mine when i get home to see what my level is on my 180 cs when i get home, i know mine is set to 3 and collects the right amount of crap for my system lol

Mine is also set to 3 and it works well. If I turn it up much more over 3 it overfills quickly. There is 11.5" of water in the sump compartment my skimmer is in and it sits on a 4.5" egg create stand, leaving it (by fluke I might add) at the 7 inch sweet spot.

Here's a pic of when I first got it, it's not running or fully set up in this pic but you get the idea
http://i261.photobucket.com/albums/i...g/DSC_0273.jpg

RedCoralEdmonton 03-09-2012 01:19 AM

that is a sexy sump! hehe

Steve

riceboy 03-09-2012 01:50 AM

http://i569.photobucket.com/albums/s...9/05329560.jpg

http://i569.photobucket.com/albums/s...9/acde028a.jpg

My sumps a little dirty, compared to Laurie's but here's my skimmer in action. It's set at number 3 and is 10.25" in the water


All times are GMT. The time now is 09:55 PM.

Powered by vBulletin® Version 3.7.3
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.