Canreef Aquatics Bulletin Board

Canreef Aquatics Bulletin Board (http://www.canreef.com/vbulletin/index.php)
-   Reef (http://www.canreef.com/vbulletin/forumdisplay.php?f=8)
-   -   Covering Tank Top (http://www.canreef.com/vbulletin/showthread.php?t=75538)

Blue Ram 05-16-2011 03:14 PM

Covering Tank Top
 
Well I now have to cover my tank - 120 gal - 48 x 24 x 24 (no centre brace) as I now have fish that are prone to jumping! Learned this the hard way yesterday after losing a new fish. Thought I would be OK for 18 hours! Guess not.
My options are glass, eggcrate or some kind of netting. Will eggcrate diffuse the light at all and would dartfish be able to get through the openings?
Glass will be a pain to keep clean and I will have to get it cut so that I can lift up a section to feed. Will gas exchange be limited having it completely covered in glass?
Would netting not sag in the middle and end up in the water?

Looking for some suggestions on what would be best and detract the least from the beauty of the tank which is why I did not want to cover it.

bryceschutte 05-16-2011 03:26 PM

Look at Kien's tank journal. He has a nice write up about his cover. I believe he made it out of screen door material.

no_bs 05-16-2011 03:32 PM

http://www.bulkreefsupply.com/store/...ing-7-x-3.html
http://www.bulkreefsupply.com/store/...rium-tops.html
http://www.bulkreefsupply.com/store/...rium-tops.html
http://www.bulkreefsupply.com/store/...m-corners.html

Tanks for the tip Carole. Recently we have had our 5" yellow wrase make 2 attempts, once on the floor, and a trip over to our hospital tank. Took 2 days to get him back over.

fishytime 05-16-2011 04:20 PM

The actual name for eggcrate is light difuser panels, so yes, it will difuse the light..... Covering completely with glass will limit gas exchange and increase heat, on the up side it cuts back on evaporation..... No need to order from BRS.... you can find everything locally....HD, totem etc has the aluminum chanel and any of the bigger garden centers should have the netting

ensquire 05-16-2011 04:23 PM

Rather than order from BRS, go to your local Canadian Tire and get a roll of there garden netting and a screen frame kit. Took me less than an hour to build.

Blue Ram 05-16-2011 05:30 PM

Quote:

Originally Posted by bryceschutte (Post 613593)
Look at Kien's tank journal. He has a nice write up about his cover. I believe he made it out of screen door material.


What the user name so I can look at the post?

fishytime 05-16-2011 06:17 PM

Quote:

Originally Posted by Blue Ram (Post 613613)
What the user name so I can look at the post?

Kien is one of those tricky guys whose user name is the same as his real name:wink:

phi delt reefer 05-16-2011 06:43 PM

Quote:

Originally Posted by fishytime (Post 613627)
Kien is one of those tricky guys whose user name is the same as his real name:wink:



lol

Blue Ram 05-17-2011 06:13 PM

Went to both Rona and Totem and Sunnyside - all the garden netting has too large of holes to use. They only had screening which I do not like because I can't even feed pellets through it. Will be ordering some 1/4 clear screening in. Thanks for everyone's suggestions.

Mandosh 05-17-2011 06:45 PM

You can double-up and over-lap the larger netting if you're alright with the way it'll look.


All times are GMT. The time now is 08:20 AM.

Powered by vBulletin® Version 3.7.3
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.