AquaC Remora Overflow
 

I'm going to be away for almost 3 days this weekend and as I haven't got the Remora dialed in yet, I was a bit worried about it overflowing all over everything - mostly the livingroom carpet :(

I thought it would be nice to have an Overflow, so here's what I came up with.

I had some 1/2" ID Acrylic tubing alaying around, so I took a short piece and cut one end off on a 45 degree angle, and drilled a 1/2" hole in the side of the collection cup, not quite at the top of the riser pipe. (oops, sorry no pics, forgot about the camera)

Then I glued the tube onto the side of the collection cup.
You may notice, I put a little block under the tube to brace it, just in case I have a Hulk Moment when I'm putting the pipe on/off...

http://i39.photobucket.com/albums/e1...Overflow01.jpg

Then I drilled a 5/8" hole in the cap of a water bottle for the drain hose (1/2" ID, 5/8" OD) ...

http://i39.photobucket.com/albums/e1...Overflow04.jpg

Bottle with cap and hose in place ...

http://i39.photobucket.com/albums/e1...Overflow06.jpg

Collection cup on the skimmer ...

http://i39.photobucket.com/albums/e1...Overflow07.jpg

Drain hose attached to skimmer & water bottle ...

http://i39.photobucket.com/albums/e1...Overflow08.jpg

Auxillary Over-Drainage Device ... :)

http://i39.photobucket.com/albums/e1...Overflow10.jpg

And there you have it :)

Only took about 1 hour & now I have Peace of Mind!

your DIYing the heck out of that thing first you make it an Urchin on steroids and now it remote waste control, I do like it.

Bill

Next week I'll probably do something to it and break it :lol:

but you have the glue to fix it...

Fast and functional !

On a separate note, is your remora quiet ? I was told these units were very quiet and, while mine's only been going 4 days (used unit) it is anything but quiet! (the wife tells me, in GREAT detail, how she can hear it clear across the house !).

1234
 

True enough, but its so much more fun to mod than repair ... :biggrin:

Go to my other mod thread,
How to make a Remora act like an Urchin
And look at the "Lid" I made for over the injector.
This cuts down almost all the sound - Now its quiet! :)
You don't have to make it out of acrylic, The one I copied is made from the lid of a margarine container & they put airline tube around the edges to close the gap. I'll try to find a link to that page.
I've also seen threads that say you can just put a piece of foam in there (not blocking the spray) to cut down the noise quick-guide-aqua-c-remora-protein-skimmer

The Overflow worked great this weekend while I away. The collection cup filled and then the excess went down the pipe & out to the bottle :biggrin:

Great now you should start making skimmers.

LOL..
Bill

Thanks, Vic. I saw your other posts late last night but I couldn't visualize where your little acrylic creation went. With the links to the other pages I get it. I've got a full shop and can cut, bond and even heat-bend acrylic so I'm definately going to make a little silencer for my remora !

My wife thanks you !

What & quit my day-job?!?
Maybe it'll pay for the motor I need to replace in the car :eek: