![]() |
Nano tank.
Hi all,
Anyone running a nano tank? I recently set up a 2 1/2 gallon. So far so good. It's been up about two weeks. I used sand/live rock/water from my big tank to get it started. Just wondering if anyone else has tried this and what kind of problems you might have had? |
Nano tank.
well the only problem i have encountered is in the past day since i added 1 more overdriven bulb. so i now have aprox 120w on my 10 g and my temp goes from 78deg at night and 81 in the day. i do not have a fan on my hood but i do have 5 vents in the top to vent heat (used to have 2 but tank temp went too high so i had to route 3 more)but the vents arent quite enough for 3 bulbs but 2 were ok.
|
Nano tank.
What kind of bulbs are you using? I have two 6400K 13 watt pc's. They get fairly hot but don't seem to raise the temp much. I'm thinking of adding a 13 watt actinic to this but I may need to add a small fan or better venting if I do.
I'm using a Aquaclear Mini(with out the foam and carbon) for flow but it doesn't seem like enough so I was thinking of going to a small power head. I find it as much fun playing with this small tank as with my big tank. Price is a lot less on the bits as well [img]tongue.gif[/img] |
Nano tank.
well my tank has about 240 gph in a 10 g which of course sounds like alot but it is just perfect i figure. i am using 3 18" zoo med bulbs but overdriven so they get hot. 2 50/50's and 1 actinic.
|
Nano tank.
Fascinating concept, that's for sure. Would like to get acquainted with a working model. Have read the exploits of the Nano-Reef.com members; looks very encouraging.
Keep us posted! AJ |
All times are GMT. The time now is 04:38 PM. |
Powered by vBulletin® Version 3.7.3
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.