LF: MP40 Driver YVR
 

Looking for a MP40 Driver as mine just kicked the bucket.

Thanks!

Sent from my SM-G960W using Tapatalk

Or... if someone can give me the details of the resistor (picture attached) so I can find a replacement and swap it out....https://uploads.tapatalk-cdn.com/202...6e73a99f94.jpg

Sent from my SM-G960W using Tapatalk

Did you get the value of that burned out resistor?

No the value is burnt off....

Sent from my SM-G960W using Tapatalk

That looks like a diode and not a resistor. Diodes have the silver band at the indicating the cathode.

Byee is correct, that's a diode, basically a one-way valve for electricity. I'd test it first if you've got a digital multimeter. Set the multimeter to the diode symbol -->|-- mode, touch black (-) probe to the cathode (silver line/mark end)and the red (+) to the anode side. You should get a reading between 0.2 to 0.7 volts if it's still good, otherwise you'll need to replace it. I know SMI Electronics in langley carries them.

Thanks for the correct terminology. :)
I found out the part number.
P6KE27A.

Sent from my SM-G960W using Tapatalk

Driver
 

I got a driver for sale from the mp40 that i drop on the groundnon my moving

Just tell me if you need