Canreef Aquatics Bulletin Board

Canreef Aquatics Bulletin Board (http://www.canreef.com/vbulletin/index.php)
-   Lounge (http://www.canreef.com/vbulletin/forumdisplay.php?f=14)
-   -   harley wiring (http://www.canreef.com/vbulletin/showthread.php?t=75308)

hound96 05-08-2011 12:24 AM

harley wiring
 
anyone know anything about it i have an 82 sportster and the left sighnals an tail light wont work. any ideas?

The Grizz 05-08-2011 01:11 AM

No idea on that model but when I had to extent my wiring when I put mini aps on my 08 all the wiring came to a central spot where they all connected. Follow the wiring check all your connections.

hound96 05-08-2011 02:21 AM

yeah just goin through it all now i also have chris comin over to look , i got a feeling its a cracked wire or a bad ground

The Grizz 05-08-2011 02:33 AM

More then likely a bad ground, you should be on the right track. If not ground or broken wire might be in the ignition switch.

hound96 05-08-2011 02:51 AM

everything else is working fine

BlueTang<3 05-08-2011 03:13 AM

Start with the basics, bulbs, connections, grounds, conuniutity from switches to the bulbs, power at the connectors, seeing the age i would check the resistance in the wiring also could have some corrosion issues. At least it should be an easy system no ecms or anything.

hound96 05-08-2011 05:31 AM

we have determined the signals to be a switch issue so im ordering one tomorrow , and it got too dark to work on the tail light so thats tomorrows project

The Grizz 05-08-2011 05:35 AM

Signal switches are usually the culprit, it was my issue on my 2000 Magna that I also have. Fairly easy fix, tail light should be simple to find if you found the signal problem this fast. Nice job Dennis :thumb:

hound96 05-08-2011 05:43 AM

i was the flashlight guy chris gets the credit for this one, wiring confuses the crap outa me


All times are GMT. The time now is 09:11 PM.

Powered by vBulletin® Version 3.7.3
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.