Canreef Aquatics Bulletin Board

Canreef Aquatics Bulletin Board (http://www.canreef.com/vbulletin/index.php)
-   Buy/Sell/Trade (Aquatics hardware related only) (http://www.canreef.com/vbulletin/forumdisplay.php?f=31)
-   -   LF - 50ml Dosing Pump (http://www.canreef.com/vbulletin/showthread.php?t=121153)

byee 10-22-2016 02:58 AM

LF - 50ml Dosing Pump
 
I'm looking for a 50ml dosing pump for my ATO setup.

tang daddy 10-24-2016 04:46 PM

You could probably use an aqualifter or maxijet.

byee 10-25-2016 12:49 AM

Done that. The water continues to siphon from the reservoir into my tank after the power to the pump has been turned off.

Looking to trying a dosing pump to help alleviate the problem

tang daddy 10-25-2016 04:33 PM

Very easy, just need to add a siphon break... I use a maxijet and added a T connection.one tube going to your sump the other pointing up at the ceiling and Make sure the tubing going up is higher than the ato tank/reservoir . Alternatively if you use a aqualifter you don't need a siphon break as those will stop when power is cut out but to be safe run the hose higher than the ato res/ tank!

corallivore 10-25-2016 11:13 PM

I bought a dosing kit a while back that I have not hooked up yet.

I think 2 pumps. a bunch of additives and a reef keeper lite.


Interested in the whole shebang?

byee 10-26-2016 05:18 AM

Quote:

Originally Posted by tang daddy (Post 1000843)
Very easy, just need to add a siphon break... I use a maxijet and added a T connection.one tube going to your sump the other pointing up at the ceiling and Make sure the tubing going up is higher than the ato tank/reservoir . Alternatively if you use a aqualifter you don't need a siphon break as those will stop when power is cut out but to be safe run the hose higher than the ato res/ tank!



I was using a maxi jet a couple years back but switched over to the aqualifter. I'm also using a solenoid valve with my aqualifter since water continues to be siphoned slowly when powered off. I want to loose the water valve solenoid power adapter......just too many wires.

This is why I'm looking at using a 50ml dosing pump

Quote:

Originally Posted by corallivore (Post 1000870)
I bought a dosing kit a while back that I have not hooked up yet.



I think 2 pumps. a bunch of additives and a reef keeper lite.





Interested in the whole shebang?


Thanks but no thanks. I already have an Apex with an Apex doser.

gregzz4 10-26-2016 07:19 PM

Have you tried this yet? Put a T in line as Chris suggested, but run it back to the ATO above the waterline

gregzz4 12-02-2016 02:10 AM

You ever solve this issue?

byee 12-02-2016 03:08 AM

Still using the aqualifter pump.


All times are GMT. The time now is 03:00 PM.

Powered by vBulletin® Version 3.7.3
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.