Canreef Aquatics Bulletin Board

Canreef Aquatics Bulletin Board (http://www.canreef.com/vbulletin/index.php)
-   Reef (http://www.canreef.com/vbulletin/forumdisplay.php?f=8)
-   -   Frustrations with Vertex Omega 150 Skimmer (http://www.canreef.com/vbulletin/showthread.php?t=110455)

kamloops_reefer 11-22-2014 04:58 PM

Frustrations with Vertex Omega 150 Skimmer
 
anyone else running this skimmer at 9-3/4" water depth is close with problems? I have the riser tube open 100% I also have the adjustable nozzle (where the water comes in) turned out almost all the way

this thing is skimming wet, not very dark. When I pulled my filter socks and put new ones in, this went crazy and just overflowed the collection cup like no tomorrow.

one other concern I always had... the skimmer doesn't' really seem to sit level - the pump weight tilts it a tad bit, and the weight of the cup usually brings it to plumb. I could be paranoid, and granted with all the problems I've had with this thing I should be - but shouldn't it be plumb?

FishingGoalie 11-22-2014 05:35 PM

Quote:

Originally Posted by kamloops_reefer (Post 922132)
anyone else running this skimmer at 9-3/4" water depth is close with problems? I have the riser tube open 100% I also have the adjustable nozzle (where the water comes in) turned out almost all the way

this thing is skimming wet, not very dark. When I pulled my filter socks and put new ones in, this went crazy and just overflowed the collection cup like no tomorrow.

one other concern I always had... the skimmer doesn't' really seem to sit level - the pump weight tilts it a tad bit, and the weight of the cup usually brings it to plumb. I could be paranoid, and granted with all the problems I've had with this thing I should be - but shouldn't it be plumb?

I had the same problem that depth is definitely too deep as i was at 9 inches and had the same problem.built a PVC square to raise it up a inch and a half. I also found that i needed to thoroughly rinse out my filter socks before putting them into my tank.

Skimmer Juice 11-22-2014 05:53 PM

Have my 150 set at 7.5 inches , works great the smell makes me want to puke when I take the lid off the cup to empty/clean lol. I would raise the skimmer and try that .

davej 11-22-2014 06:03 PM

Was running mine at 8.5" and not too happy with production. After some reading on different forums decided to raid it up an inch. So far much better. Still find it very finicky, if you feed or put hand in tank, foam collapses right away.

reeferfulton 11-22-2014 06:14 PM

hello.
i have mine in 8 inches of water and is perfect.

are all your filter socks new? new filter socks always cause skimmers to overflow like crazy for days and days in my experience.

if you are using new filter socks for the first time i recommend vinegar soak and a major rinse first.
i am guessing that thia ia your problem

jordsyke 11-23-2014 03:33 AM

yes tht is too deep

halwake 11-23-2014 06:08 PM

Thanks for the info guys. Have the 150 as well at nine inches of water and could only get tea coloured skim mate except around the throat and lid. I have raised it up to 7.5 inches water depth and we will see how that works.

Thanks again.

The Guy 11-23-2014 06:10 PM

Omega 150
 
Quote:

Originally Posted by Skimmer Juice (Post 922141)
Have my 150 set at 7.5 inches , works great the smell makes me want to puke when I take the lid off the cup to empty/clean lol. I would raise the skimmer and try that .

+ 1 agree This seems to be magic depth for me as well, I also get the gross smelling very dark glop, smells just like sewer, wife leave's the room when I empty it. I ran mine in a vinegar bath for 24 hours for break in when I got it new put it into the sump made some adjustments for a couple of days to dial it in and it's been perfect since then. Good luck :smile:

seabreeze 11-23-2014 10:24 PM

I have the Omega 150 and love it. How long have you been running it? It will flow wet until it breaks in. And yes, agree with the filter socks... will overflow like crazy if you don't rinse first.

kamloops_reefer 11-23-2014 10:28 PM

I've been using this for 1.5 years off and on between moves


All times are GMT. The time now is 08:09 PM.

Powered by vBulletin® Version 3.7.3
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.