Canreef Aquatics Bulletin Board

Canreef Aquatics Bulletin Board (http://www.canreef.com/vbulletin/index.php)
-   Tank Journal (http://www.canreef.com/vbulletin/forumdisplay.php?f=18)
-   -   75 Gal w 30 Gal Sump Reef(I told you guys Im back) (http://www.canreef.com/vbulletin/showthread.php?t=129072)

target 11-09-2019 08:37 PM

Go big or go home. 10 foot is my dream.

bauder1986 11-09-2019 10:25 PM

Well cycle is moving along excellently. Spiked to max of 0.75 Ammonia. Now we are sitting between 0 and 0.25ppm. And starting to get some algae growth. So it was time to start adding CUC. Tossed in 6 Trochus. Will be slowly building that up as time goes on.

Plus I added substrate. Pics included. Plus people wanted to see some plumbing. Well here it is folks, welcome to my world of simple stupid.


https://i.imgur.com/zEqipM0.jpg?1
https://i.imgur.com/3tldHOZ.jpg?1
https://i.imgur.com/lRh1Sh1.jpg?1

target 11-09-2019 11:39 PM

Looking good. Always fun to start adding life. My pump is ready for pick up so I'll be able to really get things moving soon

bauder1986 11-09-2019 11:40 PM

Quote:

Originally Posted by target (Post 1039291)
Looking good. Always fun to start adding life. My pump is ready for pick up so I'll be able to really get things moving soon

Oh the excitement. I love it when all the parts finally come together. Here's to your next sleepless night when you pick up the pump!

titus 11-10-2019 12:40 AM

Hello

If that's a filter of some sort on the main drain pipe (right of skimmer) into the sump that's neat.

Titus

target 11-10-2019 12:45 AM

Quote:

Originally Posted by titus (Post 1039299)
Hello

If that's a filter of some sort on the main drain pipe (right of skimmer) into the sump that's neat.

Titus

Looks like a filter sock

bauder1986 11-10-2019 12:45 AM

Quote:

Originally Posted by titus (Post 1039299)
Hello

If that's a filter of some sort on the main drain pipe (right of skimmer) into the sump that's neat.

Titus

Yes sir. It's a 4" filter sock. They are nice to have. But a pain to clean. Need to have 2 handy because it takes two days to properly and safely clean and dry each one and it takes two to three days to get dirty

Reyphox 11-10-2019 06:46 AM

Quote:

Originally Posted by bauder1986 (Post 1039302)
Yes sir. It's a 4" filter sock. They are nice to have. But a pain to clean. Need to have 2 handy because it takes two days to properly and safely clean and dry each one and it takes two to three days to get dirty


I run filter socks as well. I keep about 5-6 handy. I find the washing machine works best and easiest way to clean. Prerise with hot water to flush out detergent. Then a couple caps fulls of bleach, use warm water and an extra rise cycle. Wait a day to dry and yer off to the races with set of clean socks!

bauder1986 11-10-2019 06:54 AM

Quote:

Originally Posted by Reyphox (Post 1039317)
I run filter socks as well. I keep about 5-6 handy. I find the washing machine works best and easiest way to clean. Prerise with hot water to flush out detergent. Then a couple caps fulls of bleach, use warm water and an extra rise cycle. Wait a day to dry and yer off to the races with set of clean socks!

Yeah I use the dish washer. And no detergent. Bleach I'll use though. I'm afraid of my clothes washer eating them....it's an evil machine that eats things. Dishwasher on the other hand has been faithful to me.

bauder1986 11-11-2019 06:13 AM

Not much to report except for the fact that all nutrient levels are nearly at 0. Managed to pick up a frog spawn for a pretty good deal. It acclimated pretty quickly. We'll get shots of it eventually. And by eventually I mean when I can dial my lights back up to at least 30%. It's got some getting used to when it comes to the lighting situation.

I did come across the fact that the flow rate in my tank is to strong for LPS and softies and zoanthids(5500 GPH on a 75 Gallon Tank is SPS worthy). So I removed the tunze and the 2 fluvals in favor of 2 small 350gph fans that are always on and one 1350 GPH fan that is on every minute for one minute intervals all thanks to the Apex Controller that I'm using. And I switched back to the spray nozzle for my return so I can have better flow direction control.

Still having a bitch of a time with tuning the skimmer though. I cleaned it before use. Made sure the needle wheel was good. The air line and intake is unrestricted and I have the skimmer at Bubble Magus recommended depth. So hopefully in a week or so the break in of the skimmer will actually happen.


All times are GMT. The time now is 05:15 AM.

Powered by vBulletin® Version 3.7.3
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.