questions to some members
hey canadian man you have any ideas for a refugim in a skilter 250 or just a small or 3 gallon tank? i just read your other quate saying for DIY stuff you are the man so now that i got all this kelp and other alge i was thinking a refugim.
also just wanted to say thanks to Delphinus for all that stuff you hooked me up with. its nice to find a place where people are pretty friendly and try to help every one out. |
You might have alook at my website to see how I solved the refugium problem. :D :D
|
Bob has a pretty cool Refugium set up going.
It would be a fairly easy project to copy using acrylic. There are many options for a refugium. Mine is in my 75g sump with 1/3 partitioned off as a refugium. hangons are an easy possability as well. I would have to see your setup or get a good description of it but like i said not a complicated project. I should say I dont like drawing things in great detail when i make something. It's all in my mind. A basic drawring of course but most of my stuff just flows. "Starting to sound like a bloddy artist" :roll: The acrylic is nice to work with because we could make it any shape we need instead of using a premade thing like a 3g tank. On the flip side using premade products that you allready have brings the cost down considerably. |
sweet i dont know i can get a shot of what the general tank looks like and the table its on the reason i would like a refugim iss bcause it has lots of room on the bottom level hehe i will just show you
|
Bob,
I like the refugium...looks kind of cool. BUT...the electrical work on top of your tank is give me the creeps.... <img src = "http://www.therockies.com/rcipema/nanorefug.jpg" > - Victor. |
Quote:
Bob |
hey rcipema you an electrican for real i was thinking about be comeing one but it is still in the works. you think you could give me some advice on building my light for my nano
|
All times are GMT. The time now is 05:37 AM. |
Powered by vBulletin® Version 3.7.3
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.