Canreef Aquatics Bulletin Board

Canreef Aquatics Bulletin Board (http://www.canreef.com/vbulletin/index.php)
-   Lounge (http://www.canreef.com/vbulletin/forumdisplay.php?f=14)
-   -   looking for a needle valve for kal stirrer (http://www.canreef.com/vbulletin/showthread.php?t=134216)

Skimmerking 01-21-2023 02:11 PM

looking for a needle valve for kal stirrer
 
Im looking for one of these can anyone get these, they are from the states however.

before trying to track down the impossible

https://www.usplastic.com/catalog/im.../22326psku.jpg

mseepman 01-23-2023 06:33 PM

Is that 1/4" line? I bought one on amazon without much of an issue a few years back. My valve at the top was metal though and not huge so not great if you need to make a lot of adjustments with big hands. It was like this one.

https://www.amazon.ca/Reverse-Regula...34072620&psc=1

Skimmerking 01-23-2023 08:38 PM

Quote:

Originally Posted by mseepman (Post 1055799)
Is that 1/4" line? I bought one on amazon without much of an issue a few years back. My valve at the top was metal though and not huge so not great if you need to make a lot of adjustments with big hands. It was like this one.

https://www.amazon.ca/Reverse-Regula...34072620&psc=1

mark you said you had to use big adjustments

Skimmerking 01-23-2023 08:46 PM

Quote:

Originally Posted by mseepman (Post 1055799)
Is that 1/4" line? I bought one on amazon without much of an issue a few years back. My valve at the top was metal though and not huge so not great if you need to make a lot of adjustments with big hands. It was like this one.

https://www.amazon.ca/Reverse-Regula...34072620&psc=1

Mark its a 1/4" line goes into it they want 16 bucks for it and 35 dollars to ship it crazy

hillegom 01-23-2023 09:17 PM

That's crazy. I pm'd you

mseepman 01-24-2023 03:44 PM

Quote:

Originally Posted by Skimmerking (Post 1055800)
mark you said you had to use big adjustments

Haha no I didn't have to...but I might not have used it for the same thing you did and was unsure if the adjustment valve on this would work for you.

Strange that they want so much shipping...I'm a Prime member and shipping for that was listed as free.

Skimmerking 01-24-2023 09:55 PM

Quote:

Originally Posted by mseepman (Post 1055812)
Haha no I didn't have to...but I might not have used it for the same thing you did and was unsure if the adjustment valve on this would work for you.

Strange that they want so much shipping...I'm a Prime member and shipping for that was listed as free.

its always something mark i have prime aswell but cant seem to find that needle valve that i posted its a US thing i think

hillegom 01-24-2023 10:58 PM

I think it is this one:
https://www.usplastic.com/catalog/it...related-slider

Skimmerking 02-16-2023 12:32 AM

yes that is the one they want 16 us for it and 32 us to shipp

smokinreefer 02-17-2023 09:55 PM

This is for a kalk-stirrer?
Just going to do a slow drip?
Not the same, but would a 1/4" irrigation valve work? I used one in past for a calcium reactor.

https://www.lowes.ca/product/drip-ir...B&gclsrc=aw.ds


All times are GMT. The time now is 07:33 PM.

Powered by vBulletin® Version 3.7.3
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.